Hypsilophodon (/ˌhɪpsɨˈlɒfɵdɒn/; meaning "Hypsilophus-tooth") is an ornithopod dinosaur genus from the Early Cretaceous period of England.

The first remains of Hypsilophodon were found in 1849 and in 1869 the type species Hypsilophodon foxii was named. Abundant fossil discoveries were made on the Isle of Wight, giving a good impression of the build of the species. It was a small bipedal animal with an herbivorous or possibly omnivorous diet. Hypsilophodon reached up to 1.8 metres (5.9 ft) in length, weighed about 20 kg (45 lbs), and was an agile runner. It had a pointed head equipped with a sharp beak used to bite off plant material.

Older studies have given rise to number of misconceptions about Hypsilophodon: that it would climb trees, were armoured, reached a length of 2.3 metres (7.5 ft) and were also found outside of Wight. During the past decades new research has gradually shown this to be incorrect.

Discoveries and speciesEdit

The first remains of Hypsilophodon were recovered in the early days of paleontology in 1849, when workers on the Isle of Wight dug up the so-called Mantell-Bowerbank block. One piece of it was sold to Gideon Mantell, the other to naturalist James Scott Bowerbank. However, at the time, the bones were thought to belong to a young Iguanodon: first Mantell in 1849,[1] and then Richard Owen in 1855 describing the block as such.[2]

It was not until 1870 that paleontologist Thomas Henry Huxley was able to publish a fuller description of Hypsilophodon as we know it today, understanding it represented a species different from Iguanodon. He had gained access in 1868 to a specimen found in January that year by the Reverend William Fox,[3] who had earlier discovered some fossils of the animal as well.[4] This specimen included the skull, which had been lacking with the Mantell-Bowerbank block. Huxley first announced the new species in 1869 in a lecture; the text of this, published the same year, forms the official naming article, because it contained a sufficient description.[5] In 1870, Huxley expanded this into a full article, in which he became the first researcher to notice that the Ornithischia (not yet known as such at the time) had a pubic bone pointing backwards like birds.[6]

The type species was named Hypsilophodon foxii.[5] There is a persistent misunderstanding as to the meaning of the generic name, which is often translated directly from the Greek as "high-ridged tooth".[7] In reality Huxley, analogous to the way the name of the related genus Iguanodon ("iguana-tooth") had been formed, intended to name the animal after an extant herbivorous lizard, choosing for this role Hypsilophus and combining its name with Greek ὀδών, odon, "tooth".[8] Hypsilophodon thus means "Hypsilophus-tooth". The Greek ὑψίλοφος, hypsilophos, means "high-crested" and refers to the back frill of the lizard, not to the teeth of Hypsilophodon itself, which are not high-ridged in any case.[7] The specific name foxii honours Fox.

The holotype of the animal, today having the inventory number NHM R197, is the skull found by Fox. The Mantell-Bowerbank block is the paratype; its two pieces have been combined in the collection of the Natural History Museum as specimens NHM 28707, 39560-1.[7]

Owen was not convinced by Huxley's conclusion that Hypsilophodon represented a different genus and in 1874 renamed the species Iguanodon foxii.[9] However, this was again rejected by John Whitaker Hulke, who had obtained some additional specimens from Fox,[10] in 1874 described some presumed dermal armour,[11] and in 1882 published a full osteology of the species.[12] Later, the number of specimens was increased by Reginald Walter Hooley. In 1905, Baron Franz Nopcsa dedicated a study to Hypsilophodon,[13] and in 1936 William Elgin Swinton did the same,[14] on the occasion of the mounting of two restored skeletons in the British Museum of Natural History.[15]

Modern research of Hypsilophodon began with the studies of Peter Malcolm Galton, starting with his thesis of 1967.

Although new finds continue to be made,[7] most known Hypsilophodon specimens were discovered between 1849 and 1921 and are in the possession of the Natural History Museum that acquired the collections of Mantell, Fox, Hulke and Hooley.[17] These represent about twenty individual animals. Apart from the holotype and paratype, the most significant specimens are: NHM R5829, the skeleton of a large animal; NHM R5830 and NHM R196/196a, both skeletons of juvenile animals; and NHM R2477, a block with a skull together with two separate vertebral columns. Fossils from other locations, especially from the mainland of southern Great Britain, Portugal and Spain, have once been referred to Hypsilophodon. However, in 2009 Galton concluded that the specimens from Great Britain proper were either indeterminable or belonged to Valdosaurus, and that the fossils from the rest of Europe were those of related but different species. This leaves the finds on Isle of Wight, off the south coast of England, as the only known authentic Hypsilophodon fossils.[7] The fossils have been found in the Hypsilophodon Bed, a one metre thick marl layer surfacing in a 1200 metre long strip along the Cowleaze Chine parallel to the southwest coast of Wight,[17] part of the upper Wessex Formation and dating to the late Barremian, about 126 million years old. Reports that Hypsilophodon would be present in the later Vectis Formation, Galton in 2009 considered as unsubstantiated.[7]

There is only one known species of Hypsilophodon, Huxley's original H. foxii. Galton and James Jensen named another species in 1978/1979, Hypsilophodon wielandi, which is based on a thigh bone from South Dakota, USA, specimen AMNH 2585 found in 1891 by George Reber Wieland.[18] This species was once seen as indicative of a late land bridge between North America and Europe,[19] but it is now regarded as an indeterminate basal ornithopod.[20] Galton in 2009 considered it a nomen dubium, the femur in view of the provenance possibly belonging to Zephyrosaurus.


Hypsilophodon was a relatively small dinosaur, though not quite so small as, for example, Compsognathus. For Hypsilophodon often a maximum length of 2.3 metres is stated. This has its origin in a study of 1974 by Galton, in which he extrapolated a length of 2.28 metres based on specimen BMNH R 167, a thigh bone.[17] However, in 2009, Galton concluded that this femur in fact belonged to Valdosaurus and downsized Hypsilophodon to a maximum known length of 1.8 metres,[7] the largest specimen being NHM R5829 with a femur length of 202 millimetres.[17] Typical specimens are about 1.5 metres long. Hypsilophodon would have reached up to half a metre in height. In 2010, Gregory S. Paul estimated a weight of 20 kilograms (44 lb) for an animal two metres in length.[21]

Like most small dinosaurs, Hypsilophodon was bipedal: it ran on two legs. Its entire body was built for running. A light-weight, minimized skeleton, low, aerodynamic posture, long legs and stiff tail, immobilised by ossified tendons, for balance: all would have allowed it to travel remarkably fast for its size. Galton in 1974 concluded it would have been among the ornithischians best adapted to running.

Despite living in the last of the periods in which non-avian dinosaurs walked the earth, the Cretaceous, Hypsilophodon had a number of seemingly "primitive" features. For example, there were five digits on each hand and four on each foot. With Hypsilophodon the fifth finger had gained a specialised function: being opposable it could serve to grasp food items.[17] Also, although it had a beak like most ornithischians, Hypsilophodon still had five pointed triangular teeth in the front of the upper jaw, the premaxilla. Most herbivorous dinosaurs had, by the Early Cretaceous, become sufficiently specialized that the front teeth had been altogether lost (although there is some debate as to whether these teeth may have had a specialized function in Hypsilophodon). More to the back, the upper jaw carried up to eleven teeth in the maxilla; the lower jaw had up to sixteen teeth. The number was variable, depending on the size of the animal.[7] The teeth to the back were fan-shaped.[17]

The skull of Hypsilophodon was short and relatively large. The snout was triangular in outline and sharply pointed, ending in an upper beak of which the cutting edge was markedly lower than the maxillary tooth row. The eye socket was very large. A palpebral with a length equal to half the diameter of the eye socket overshadowed its top section. A sclerotic ring of fifteen small bone plates supported the outer eye surface. The back of the skull was rather high, with a very large and high jugal and quadratojugal closing off a highly positioned small infratemporal fenestra.[17]

The vertebral column consisted of nine cervical vertebrae, fifteen or sixteen dorsal vertebrae, six of five sacral vertebrae and about forty-eight vertebrae of the tail. Much of the back and the tail was stiffened by long ossified tendons connecting the spines on top of the vertebrae. The processes on the underside of the tail vertebrae, the chevrons, were also connected by ossified tendons, which however were of a different form: they were shorter and split and frayed at one end, with the point of the sharp other end laying within the diverging end of the subsequent tendon. Furthermore, there were several counterdirectional rows of these, resulting in a herring-bone pattern completely immobilising the tail end.[17]

A long-lived misconception concerning the anatomy of Hypsilophodon has been that it was armoured. This was first suggested by Hulke in 1874, after the find of a bone plate in the neck region.[11] If so, Hypsilophodon would have been the only known armoured ornithopod.[17] As Galton pointed out in 2008, the putative armour instead appears to be from the torso, an example of internal intercostal plates associated with the rib cage. It consists of thin mineralized circular plates growing from the back end of the middle rib shaft and overlapping the front edge of the subsequent rib. Such plates are better known from Talenkauen and Thescelosaurus, and were probably cartilaginous in origin.


Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.